Product Reviews

SmallRig 2905B Field Monitor Mount Holder Review

A compact adjustable mount for camera creators who want to position a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig Field Monitor Mount Holder review looks at a compact mount built for positioning 5- and 7-inch camera monitors on a cage or handle.

Its cold shoe base, adjustable tilt and swivel, and anti-twist details make it a practical option for rigs that need a direct monitor attachment.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera creators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Supports 5- and 7-inch camera monitors and mounts through a cold shoe on top of a camera cage or handle.
  • Tilts up to 180 degrees and swivels 360 degrees for monitor positioning.
  • Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins and a silicone pad are intended to reduce monitor twisting and scratching.

Pros

  • Offers broad tilt and swivel adjustment in a compact mount.
  • Thumb-adjustable tilt tension makes quick angle changes straightforward.

Consider before buying

  • Swivel tension requires the included Allen wrench, so it is less convenient to adjust than tilt tension.
  • The supported load decreases at lower tilt angles, requiring buyers to check the limit for their chosen position.
Read the full review summary

The SmallRig 2905B combines a cold shoe base with a top 1/4-inch screw, so it can attach to a compatible camera cage or handle and hold a monitor or another small accessory.

The mount tilts up to 180 degrees and swivels 360 degrees; a thumbscrew adjusts tilt tension, while an Allen wrench adjusts swivel tension.

Its locating pins and silicone pad are designed to help resist monitor rotation and surface scratches, including on compatible Ninja V and V+ monitors.

The compact 76-gram body is suited to a minimal camera rig, but the stated load capacity changes with tilt angle, so buyers should check the supported limit for their intended position and tighten the top screw with the provided wrench.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Monitor compatibility

Designed for 5- and 7-inch monitors, with locating pins intended to secure compatible Ninja V and V+ units.

8/10

Angle adjustment

Offers up to 180-degree tilt and 360-degree swivel, with distinct tension adjustments.

8/10

Mounting flexibility

Combines a cold shoe base, a bottom 1/4-inch threaded hole, and a top 1/4-inch screw.

8/10

Anti-twist details

Locating pins and a silicone pad address monitor movement and surface contact.

7/10

Load guidance

Provides different maximum loads by tilt angle, though users need to match their setup to those limits.

9/10

Compactness

The mount weighs 76 grams and folds to a compact 78 by 67 by 42 millimeters.

Key Features and Specifications of SmallRig Monitor Mount

  • Supports 5- and 7-inch camera monitors and mounts through a cold shoe on top of a camera cage or handle.
  • Tilts up to 180 degrees and swivels 360 degrees for monitor positioning.
  • Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins and a silicone pad are intended to reduce monitor twisting and scratching.
  • A bottom 1/4-inch-20 threaded hole supports connection to a magic arm or stabilizer; the top 1/4-inch-20 screw can hold a monitor, microphone, or light.
  • Load limits vary by tilt angle: less than 9.3 pounds at 90 degrees, less than 5.5 pounds at 45 degrees, and less than 5 pounds at 30 degrees.
  • The holder weighs 76 grams and has a folded size of 78 by 67 by 42 millimeters.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Offers broad tilt and swivel adjustment in a compact mount.
  • Thumb-adjustable tilt tension makes quick angle changes straightforward.
  • The cold shoe base and threaded hole provide more than one way to integrate it into a rig.
  • Locating pins and a silicone pad add thoughtful monitor contact and anti-twist features.

Consider before buying

  • Swivel tension requires the included Allen wrench, so it is less convenient to adjust than tilt tension.
  • The supported load decreases at lower tilt angles, requiring buyers to check the limit for their chosen position.
  • For added security, the top knurled screw needs retightening with the Allen wrench.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider the 2905B if you use a 5- or 7-inch field monitor and want a compact mount that attaches directly to a compatible cold shoe.

Its broad adjustment range can help place the screen where it is visible without building a longer arm into the setup.

It may also suit a lightweight accessory such as a microphone or light, since the top screw supports those types of gear.

Before mounting, compare the accessory's weight and the intended tilt angle with the stated capacity, then use the wrench to secure the screw.

Who should skip it

Choose another mounting approach if your rig depends on frequent swivel-tension changes without a tool, or if the planned device and tilt angle exceed the corresponding load limit.

Check your cage or handle first if it does not have a compatible cold shoe or a suitable 1/4-inch-20 connection for the mount's threaded base.

How the SmallRig Monitor Mount fits a camera rig

Angle control for field monitoring

The 180-degree tilt and 360-degree swivel offer useful orientation choices when framing or checking a shot. Tilt tension has a thumbscrew adjustment, while swivel tension uses an Allen wrench, so the two axes have different adjustment convenience.

Load depends on position

Capacity is not a single figure across the whole range: the stated maximum is under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees.

Buyers should use the limit for the actual tilt position and allow for the mounted device and any attached accessories.

A compact mounting interface

The cold shoe base is intended for a cage or handle, and the base also has a 1/4-inch-20 threaded hole for a magic arm or stabilizer.

The top 1/4-inch-20 screw can support a monitor, microphone, or light, while the locating pins and silicone pad address twisting and surface contact.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig 6313 Camera Monitor Mount

Consider the 6313 if portrait-orientation mounting is a priority; the 2905B may fit better if its stated 5- and 7-inch monitor support and angle-specific load guidance align with your setup.

  • The 6313 also offers 180-degree tilt and 360-degree pan, plus a cold shoe base and bottom threaded hole.
  • Its description adds horizontal and vertical mounting and a retractable locating screw.
  • The 2905B has a cold shoe base, a bottom threaded hole, and a top 1/4-inch-20 screw, with angle-dependent load limits.

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Articulating Magic Arm

Choose the articulating arm if you need a longer, more flexible connection between two threaded mounting points. The 2905B is the more direct choice for a compatible cold shoe setup and a monitor holder with specified tilt-angle limits.

  • This 5.5-inch articulating arm uses 1/4-inch screws at both ends and double 360-degree ball heads.
  • It is described for monitors and lights, with a best load of 1.5 kilograms.
  • The 2905B is a compact monitor holder with a direct cold shoe base and angle-dependent load limits.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact camera rig that needs an adjustable mount for a 5- or 7-inch monitor.

Its cold shoe base, threaded connection, broad movement range, and anti-twist details cover the core needs of a straightforward field-monitor setup.

Check the angle-specific capacity against your device and remember that swivel tension and final screw security require the Allen wrench. If those constraints suit your rig, the 2905B offers a focused, space-saving mounting option.

Your review at a glance

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera creators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Supports 5- and 7-inch camera monitors and mounts through a cold shoe on top of a camera cage or handle.
  • Tilts up to 180 degrees and swivels 360 degrees for monitor positioning.
  • Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins and a silicone pad are intended to reduce monitor twisting and scratching.

Written by

crisissurvivortips.com Editorial Team

Editorial team

Independent editorial coverage of everyday preparedness.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount Holder

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera creators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Supports 5- and 7-inch camera monitors and mounts through a cold shoe on top of a camera cage or handle.
  • Tilts up to 180 degrees and swivels 360 degrees for monitor positioning.
Check Video Reviews on Amazon