Product Reviews

SMALLRIG Adjustable Camera Monitor Mount Review

A compact monitor mount for camera rig users who want flexible landscape or portrait positioning and a locating-screw connection.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Adjustable Camera Monitor Mount review centers on a compact support built for camera monitors and accessories, with a broad range of angle adjustment and locating hardware intended to resist unwanted movement.

Its appeal is strongest for filmmakers whose cages or handles use the specified mounting points and who need both landscape and portrait monitor positions.

SMALLRIG 6314 Mount Review Summary

The quick verdict

SMALLRIG 6314 Adjustable Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact monitor mount for camera rig users who want flexible landscape or portrait positioning and a locating-screw connection.

  • Model 6314 monitor support, designed to attach to a camera cage, top handle, or other support accessory.
  • Accepts monitor or accessory connections using a 1/4-20 threaded hole or 1/4-20 locating hole; named examples include Ninja TX, TX GO, and Shinobi II.
  • Top interface combines a retractable 1/4-20 locating screw, locating pins, and a silicone pad intended to help prevent twisting and scratching.
  • Bottom 3/8-16 locating screw is designed for an ARRI locating hole to form an anti-twist connection.

Pros

  • Useful combination of anti-twist locating details at both the monitor and support interfaces.
  • Full pan and tilt ranges support portrait as well as landscape screen placement.

Consider before buying

  • The lower connection is specifically a 3/8-16 ARRI locating screw, so buyers need to verify their support has the matching locating hole.
  • The mount’s compatibility depends on the monitor’s 1/4-20 threaded or locating-hole arrangement; confirm the connection before purchase.
Read the full review summary

The 6314 combines a 3/8-16 ARRI locating screw at the base with a retractable 1/4-20 locating screw, locating pins, and a silicone contact pad at the top.

That gives it a more purpose-built monitor interface than a basic screw stud, while its 360-degree pan and 180-degree tilt make it possible to reorient a screen without changing the rest of the rig.

The thumb knob is designed for quick positioning, and the included L-shaped Allen wrench gives you a way to tighten the connection further.

This is a sensible fit for compact video setups where a monitor mounts to a compatible cage, top handle, or support accessory and portrait framing is part of the workflow.

Its 75.6-gram aluminum-alloy and stainless-steel construction should suit buyers looking to keep added rig hardware light.

Before buying, check the monitor’s screw or locating-hole arrangement and the support’s bottom interface; the description names compatibility with monitors such as Ninja TX, TX GO, and Shinobi II, plus other accessories with a 1/4-20 threaded or locating hole.

The buying factors

SMALLRIG 6314 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Positioning range

The described 360-degree pan and 180-degree tilt support broad orientation changes, including landscape and portrait installations.

9/10

Mounting interface

The ARRI locating screw below and retractable 1/4-20 locating screw, pins, and silicone pad above offer multiple anti-twist details.

8/10

Monitor compatibility

It is intended for a variety of monitors and names several compatible models, though buyers should confirm their exact attachment interface.

8/10

Adjustment convenience

A thumb knob supports angle and tilt damping adjustment, with an included Allen wrench for additional tightening.

9/10

Rig weight impact

At 75.6 grams, the mount adds little weight by the supplied specification.

8/10

Setup flexibility

Landscape and portrait mounting expand framing options, while the base interface depends on a compatible locating point.

Key Features and Specifications of SMALLRIG 6314 Mount

  • Model 6314 monitor support, designed to attach to a camera cage, top handle, or other support accessory.
  • Accepts monitor or accessory connections using a 1/4-20 threaded hole or 1/4-20 locating hole; named examples include Ninja TX, TX GO, and Shinobi II.
  • Top interface combines a retractable 1/4-20 locating screw, locating pins, and a silicone pad intended to help prevent twisting and scratching.
  • Bottom 3/8-16 locating screw is designed for an ARRI locating hole to form an anti-twist connection.
  • Provides 360-degree pan and 180-degree tilt, with landscape and portrait installation options.
  • Thumb-operated knob adjusts the angle and tilt damping; an L-shaped Allen wrench is included for additional tightening.
  • Made from black anodized aluminum alloy and stainless steel; listed weight is 75.6 grams.

Pros and Cons of SMALLRIG 6314 Mount

Pros

  • Useful combination of anti-twist locating details at both the monitor and support interfaces.
  • Full pan and tilt ranges support portrait as well as landscape screen placement.
  • Thumb-operated adjustments help make repositioning straightforward on a rig.
  • Lightweight metal construction is suited to adding a mount without a large weight increase.

Consider before buying

  • The lower connection is specifically a 3/8-16 ARRI locating screw, so buyers need to verify their support has the matching locating hole.
  • The mount’s compatibility depends on the monitor’s 1/4-20 threaded or locating-hole arrangement; confirm the connection before purchase.
  • The supplied description gives no load rating, so buyers with a heavier monitor should check whether the mount is suitable for that setup.

Who Should Buy SMALLRIG 6314 Mount?

Good fit

Consider the 6314 if your camera rig already has a compatible ARRI locating hole and you want a dedicated monitor support with both pan and tilt adjustment.

The locating details at the top and base are relevant if you value a more constrained connection than a simple screw alone, while the silicone pad is intended to protect the screen’s contact area.

It is especially appealing when you switch between horizontal and vertical shooting or adjust monitor angle during setup.

The knob-led adjustment and included wrench offer a practical balance: quick positioning for routine changes, with a tool available when you want extra tightening.

Check both ends before ordering. Confirm that the monitor or accessory accepts the specified 1/4-20 connection and that the cage, handle, or support provides the matching 3/8-16 ARRI locating point.

If your monitor is unusually heavy, seek a load suitability confirmation for that exact configuration.

Who should skip it

Skip this model if your rig lacks a compatible 3/8-16 ARRI locating hole and you do not have a suitable way to connect it. The stated base interface is central to the intended anti-twist setup.

Look elsewhere if your monitor uses a different attachment standard or if you need a published load capacity to confirm support for a particular screen. Verify those requirements before choosing a mount.

How the SMALLRIG 6314 Mount fits a camera rig

A locating connection at each end

The mount’s design puts anti-twist details on both sides of the connection.

At the bottom, the 3/8-16 screw is intended for an ARRI locating hole; at the top, the retractable 1/4-20 screw works alongside locating pins and a silicone pad.

This arrangement is a reason to choose it when your rig and monitor match those interfaces. It also makes compatibility checking important: a threaded connection alone may not provide the locating points this design is built around.

Positioning for different frames

A 360-degree pan and 180-degree tilt give the monitor substantial orientation range, and the description explicitly includes both horizontal and vertical installation.

That flexibility can be useful when a camera alternates between landscape and portrait compositions, or when the screen needs to face a different viewing position.

It changes how the monitor can be positioned; it does not establish a particular load limit or guarantee that every angle suits every monitor.

Adjustment and tightening

The thumb knob is intended to make angle changes and tilt damping adjustments accessible without reaching for a tool each time. For additional tightening, an L-shaped Allen wrench is included.

That combination can suit a rig that gets repositioned during setup, though buyers should confirm the knob and mounting points feel secure with their particular monitor before a shoot.

A lightweight addition

At 75.6 grams, the 6314 is a modest addition to a camera support assembly. The listed materials are anodized aluminum alloy and stainless steel, with a finish described as designed to resist corrosion, scratches, and impacts.

Those are material and design characteristics, not a substitute for checking how the mount performs in a specific rig or environment.

Alternatives to SMALLRIG 6314 Mount

Camera Mounts & Clamps alternative

SMALLRIG 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 2905B Field Monitor Mount Holder

Choose the 6314 when your support has the matching ARRI locating hole and portrait installation is useful.

Consider the 2905B if you specifically need a cold-shoe base and your monitor is in its stated 5- or 7-inch range; check its angle-dependent load guidance for your setup.

  • The 2905B is intended for 5- and 7-inch monitors, attaches through a cold shoe at the bottom, and offers 180-degree tilt and 360-degree swivel.
  • It has locating pins and a silicone pad on top; its tilt tension is adjusted by thumbscrew and swivel tension by Allen wrench.
  • The 6314 uses a 3/8-16 ARRI locating screw at its base and supports horizontal or vertical monitor installation.

Camera Mounts & Clamps alternative

SMALLRIG 2732 Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SMALLRIG 2732 Magic Arm Clamp Kit

Choose the 6314 for a direct, low-profile monitor mount when its locating interfaces match your rig.

The 2732 may suit a setup that needs a longer reach or clamping onto a compatible surface, but its arm-and-clamp arrangement is a different, bulkier positioning approach.

  • The 2732 combines a super clamp with a 9.8-inch articulating arm.
  • The clamp has 1/4-20 and 3/8-16 threads, opens from 15 to 54 millimeters, and the arm has 1/4-inch screws at both ends with dual 360-degree ball heads.
  • The 6314 is a compact monitor mount with a fixed support-side locating screw and dedicated pan and tilt adjustment.

Is SMALLRIG 6314 Mount Worth It?

The SMALLRIG 6314 Adjustable Camera Monitor Mount is worth considering for a camera rig with the matching 3/8-16 ARRI locating point and a monitor that accepts its 1/4-20 top connection.

Its combination of pan, tilt, portrait support, locating features, and low listed weight makes it a purposeful option for flexible monitor positioning.

Buy after checking both attachment interfaces and the suitability of the mount for your monitor’s weight, since no load rating is provided in the product details.

If those conditions fit your rig, its adjustment range and anti-twist design make a strong case for it.

Your review at a glance

SMALLRIG 6314 Adjustable Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact monitor mount for camera rig users who want flexible landscape or portrait positioning and a locating-screw connection.

  • Model 6314 monitor support, designed to attach to a camera cage, top handle, or other support accessory.
  • Accepts monitor or accessory connections using a 1/4-20 threaded hole or 1/4-20 locating hole; named examples include Ninja TX, TX GO, and Shinobi II.
  • Top interface combines a retractable 1/4-20 locating screw, locating pins, and a silicone pad intended to help prevent twisting and scratching.
  • Bottom 3/8-16 locating screw is designed for an ARRI locating hole to form an anti-twist connection.

Written by

crisissurvivortips.com Editorial Team

Editorial team

Independent editorial coverage of everyday preparedness.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 6314 Adjustable Camera Monitor Mount

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact monitor mount for camera rig users who want flexible landscape or portrait positioning and a locating-screw connection.

  • Model 6314 monitor support, designed to attach to a camera cage, top handle, or other support accessory.
  • Accepts monitor or accessory connections using a 1/4-20 threaded hole or 1/4-20 locating hole; named examples include Ninja TX, TX GO, and Shinobi II.
Check Video Reviews on Amazon